LG Washing Machine Cd Display
Applies to washer-dryer combination models. A wash-only machine does not show Cd.
What to check first
- Nothing is wrong — Cd means the drying cycle finished and the machine is in its anti-wrinkle tumble.
- To end it: remove the clothes, or press Start/Pause.
- Left alone, the display continues for up to 4 hours while the machine periodically tumbles the load — that is the feature working, not a cycle that will not stop.
Cd is the third of LG's “looks like a fault, is actually a status” displays, alongside CL and tCL. On washer-dryer combos, the end of a drying cycle is not the end of the machine's work: LG's front-load list describes Cd as a cool down indicator that appears when the drying cycle completes, with the machine periodically tumbling — fluffing — the load to prevent wrinkles while it waits for you.
The behaviour that worries people — the drum turning occasionally, long after the cycle “ended” — is the documented feature. LG puts its limit at up to 4 hours, and gives it two exits: take the clothes out, or press Start/Pause.
Safety first
- A freshly dried load can be hot: Cd's tumble is the cool-down phase, so give hot items a moment before handling them straight from the drum.
- No safety action is needed for Cd itself — it is a status display, and this page's stop conditions do not apply to it.
- Stop condition: stop using the machine and unplug it — and do not run it again until it has been checked — if you smell burning, see smoke, find damaged electrics (a scorched plug, a melted or cut cable), or water is leaking in quantity.
Common causes
A drying cycle has completed
That is the whole trigger: Cd is displayed when the drying cycle completes, per LG's list. The machine is reporting a finished job, not a failed one.
The load is still in the drum
The tumble continues because the clothes are still there — the anti-wrinkle routine runs until the load is removed or Start/Pause is pressed, up to LG's 4-hour limit.
What to do when you see Cd
- Decide whether you want the tumble to continueIf the load will sit for a while, leaving Cd running is the wrinkle-prevention working for you — the machine tumbles only periodically, not continuously.
- End it when you are readyRemove the clothes, or press Start/Pause — LG's two documented exits. The display clears and the machine is fully at rest.
When to call a technician
Cd never needs a technician. The case that would is a machine that tumbles continuously with no Cd logic behind it, or a dry cycle that never completes at all — that second pattern belongs to dHE, the dry function error, not to this display.
Model differences that matter
| Machine type | What changes |
|---|---|
| Washer-dryer combos | Cd belongs here: cool down indicator at the end of drying; periodic anti-wrinkle tumble up to 4 hours; ends when the load is removed or Start/Pause is pressed. |
| Wash-only models | No Cd — there is no drying cycle to complete. The end of a wash is simply the end. |
One-page checklist
- Cd recognised as the cool-down indicator — not a fault
- Load removed, or Start/Pause pressed, when the tumble should end
- Hot items allowed a moment before handling
Official LG references
Questions people ask about Cd
Why is the drum still turning hours after the cycle ended?
Because Cd is running its course: LG describes the machine periodically tumbling the load to prevent wrinkles for up to 4 hours after drying completes, until the clothes are removed or Start/Pause is pressed.
Does Cd use much energy just sitting there?
LG's description is of periodic tumbling, not continuous running — short turns to fluff the load. If you want it fully stopped, removing the load or pressing Start/Pause ends it immediately.
Cd or dHE — which do I have?
Cd is lower-case d in LG's rendering (Cd) and means cool down — a status. dHE is the temporary dry function error and is a fault path with a reset and a service ending. Read the display carefully: the H in the middle changes the meaning entirely.