LG Washing Machine vS Error
Applies to front-load washers on LG's list. The same fault can display as vS, u5 or uS depending on the panel.
What to check first
- Press Start/Pause (start/stop) to try to resume the cycle — LG's first step.
- If vS comes back, switch the washer off and restart it.
- If vS keeps appearing, LG directs you to an inspection of the vibration sensor via LG Support — there is no longer home procedure in its documentation.
vS is one of LG's shorter code entries, and this page stays as short as LG's own guidance: the vibration sensor is the component that reports how the machine is shaking, and vS means the washer has a potential problem with that sensor — its contacts, or the sensor itself.
Unlike UE, which is about the load, vS is not a code you redistribute your way out of. LG gives exactly two things to try — resume, then restart — and after that the fault belongs to a sensor inspection.
Safety first
- A washer reporting a vibration-sensor problem should not be left running unattended through repeated restarts — if the machine is also walking, banging or shaking violently, switch it off and keep it off.
- Unplug the washer before reaching behind it or underneath it for any inspection of your own.
- Stop condition: stop using the machine and unplug it — and do not run it again until it has been checked — if you smell burning, see smoke, find damaged electrics (a scorched plug, a melted or cut cable), or water is leaking in quantity.
Common causes
A contact issue at the vibration sensor
LG's first named possibility: the sensor's connection is not making proper contact, so its readings cannot be trusted.
A malfunctioning vibration sensor
LG's second: the sensor itself has failed. Distinguishing the two is what the service inspection is for.
Step-by-step checks
- Try to resumePress the Start/Pause (start/stop) button to resume the cycle, per LG's guidance.
- Restart the washerIf vS appears again, power the washer off and restart it, then run the cycle again.
- Note when it appearsBefore booking the inspection, note the pattern — at spin only, on every cycle, since a move or installation. That is the first thing LG Support or the technician will ask, and it helps separate a sensor fault from a machine being shaken by its setting (for which UE, the load code, is the relevant page).
When to call a technician
If vS persists after the restart, LG directs you to request an inspection of the vibration sensor via LG Support. There is no user-level sensor replacement or calibration in LG's published guidance — the inspection is the fix path.
Model differences that matter
| Machine type | What changes |
|---|---|
| Front load | vS is on LG's front-load list, also displayed as u5 or uS. Resume, then restart; a repeating vS goes to a sensor inspection. |
| Top load | vS does not appear on LG's top-load lists we checked. A top loader shaking or stopping at spin is documented under UE — start there. |
One-page checklist
- Start/Pause pressed to resume
- Washer powered off and restarted
- Pattern noted (which cycles, since when)
- vS persists — sensor inspection requested via LG Support
Official LG references
Questions people ask about vS
Is vS the same as UE?
No. UE is the load-balance code — the washer reporting that the laundry will not distribute evenly. vS is about the vibration sensor itself: a contact issue or a malfunctioning sensor, on LG's description.
Why does my display show u5 or uS instead?
Display rendering: LG groups vS, u5 and uS as the same vibration-sensor error on its front-load list — the letter forms differ by panel, the meaning does not.
Can I just keep restarting past vS?
LG allows a resume and a restart. A vS that keeps returning is, on LG's own guidance, an inspection case — the sensor is a safety witness for spin behaviour, so do not run the machine unattended against a repeating vS.